- Click Download File to download the file. When the File Download window appears, click Save to save the file to your hard drive. Browse to the location where you downloaded the file and double-click the new file. Read over the release information presented in the dialog window.
- Download; Brigadier E6782: Verizon Wireless: USB Driver Installation Guide (DOC, 278 KB) Brigadier E6782 32bit Driver (7.6 MB) Brigadier E6782 64bit Driver (5.9 MB) Cadence LTE S2720: All carriers: USB Driver Installation Guide (PDF, 575 KB) DuraForce PRO 32bit Driver (8.0 MB) DuraForce PRO 64bit Driver (6.1 MB) Contact S3150: Virgin Mobile.
Download drivers and support packages for VIA products on these pages. VIA Embedded Boards and Systems. To obtain BIOS, drivers, BSPs or EVKs for VIA Embedded boards and systems please visit the respective product page you are inquiring about and click on the.
Are you getting error messages 'Setup could not detect your product', TV Tuner not available' or 'Unable to locate capture filter' after Windows 10 installed an update?
This is a known 'feature' of the new release of Windows 10, related to video cameras but also affecting TV tuners and video recorders.
The latest versions of WinTV v10, v8.5, WinTV v8 and Hauppauge Capture automatically update the Windows 10 drivers to fix this error message. If you need to manually fix this, click here.
Questions or problems? Please contact Hauppauge support at: [email protected]
Prodinfo: get information on your Hauppauge TV tuner
Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe
HCWClear: remove the Hauppauge driver and applications from your PC
HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the WinTV program.
Digital Signal Monitor: displays the relative strength of the digital signal on the channel you are tuned to
The Signal Monitor is a handy tool which can be used to either adjust your digital TV antenna, or when used with digital cable TV, to know if your digital signal is too weak to receive a signal without distortion.
Rescan for TV channels: How to re-scan for channels in the WinTV application
If your TV channel line up has changed due to a change in transmission frequencies, we recommend that you erase the WinTV channel database before you re-scan for channels.
IR Blaster setup
The IR Blaster is suppored on some model HD PVR 2's and the Colossus 2. Learn how to setup the IR Blaster to control your cable or satellite set top box in WinTV v10.
Windows 10 requires special drivers to avoid errors during the Hauppauge product installation.
The latest versions of WinTV v10, 8.5 and WinTV v8 and Hauppauge Capture include these drivers. But if you are looking just for the Windows 10 driver, these are updated drivers which can be used with Windows 10.
North America products
- WinTV-quadHD USB
- HD PVR 2 (all models)
- WinTV-dualHD, WinTV-soloHD
How to find the product code of your Hauppauge product:
Hauppauge product codes on WinTV internal boards are normally found on the TV tuner. This is a five digit number normally followed by a revision (REV). You need to look at the first two numbers to determine the product type. The other numbers are related to the accessories which are on the product.
On the MediaMVP, WinTV-USB and other 'boxes', the product code is normally on a label on the bottom of the case.
165xxx WinTV-quadHD PCIe
111401, 72001 WinTV-HVR-955Q, WinTV-HVR-950Q
72301, 65301 111XXX WinTV-HVR-850
1111XX WinTV-HVR-850, WinTV-Analog Stick
22XXX, 79XXX, 118xxx WinTV-HVR-1250, -1260, -1265
723x WinTV-HVR-1260 (HP)
69xxx, 121xxx WinTV-HVR-4xxx
26XXX, 25XXX WinTV-PVR-150
29XXX, 24XXX WinTV-PVR-USB2
Download Qua Driverpack
Download Qua Drivers62XXX
34XXX 88X based WinTV boards
49XXX HD PVR
Hauppauge has a new SDK available for .NET applications. The SDK simplifies the development of TV applications in .NET. The SDK makes it easy for applications to perform functions like querying the available channels, start watching a channel in an application supplied window, pause/play, adjust volume, display OSD graphics, record live tv to a file, etc.