Drivers Recursion Port Devices

-->
  1. Drivers Recursion Port Devices Examples
  2. Drivers Recursion Port Devices Lucie
  3. Drivers Recursion Port Devices Definitions
  4. Drivers Recursion Port Devices Types
  5. Drivers Recursion Port Devices Definition

For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following:

  • Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port.

  • To configure a serial port as COM port, comply with the requirements that are defined in Configuration of COM Ports.

BUT, must be smart enough to install the drivers first (not plug&play), and look in Device Manager to see what port was assigned, or assign a different port. The nice thing is that it remembers that port for next time, so you are not chasing ports each time it is plugged in - provided that the port selected remains free on the host PC. Plugged back in the device, only the led turn on but nothing else worked. Stuck with a bricked device. Amlogic USB burn tool would not even see my device. Using the short pin method made the tool see my device.:fingers-crossed: But no firmware would flash until I tried the Tanix TX9 out of despair.

Drivers Recursion Port Devices Examples

For more information about installing serial ports and COM ports using the Ports device setup class and the Serial function driver, see the following topics:

Drivers Recursion Port Devices Lucie

Drivers recursion port devices luciePort

Drivers Recursion Port Devices Definitions

Port

Drivers Recursion Port Devices Types

Using

Drivers Recursion Port Devices Definition

If you do a custom installation of a COM port, you must comply with the COM port requirements that are defined in Configuration of COM Ports.

Comments are closed.