I’ll just go straight to the point. This simple tutorial will show you steps to properly install Qualcomm QDLoader drivers on Windows, either Windows 8, 8.1 or 10. You may need it in few occasions involving your MIUI device powered with any variant of Qualcomm chipset. As we know it that many of Xiaomi’s most popular phones like Mi5, Mi 5, Redmi Note 3, and so on, are powered with Qualcomm Snapdragon chipset. Any way, let’s just start the guide.
Also read : How to install MIUI 8 Developer ROM on Redmi Note 3.
- Download Qualcomm QDLoader Drivers package.
- Download ADB USB Drivers or Mi PC Suite.
- Download Minimal Fastboot files.
- Any MIUI device powered with Qualcomm Snapdragon.
- A USB cable.
- A computer running Windows 8, 8.1 or 10.
Qualcomm QDLoader USB Driver Download For Windows Step 1 -Install either ADB or Mi PC Suite so as to communicate your device with Personal Computer. You have to need to set up ADB Driver by which Windows will recognize this gadget. Step 2 – Now, Enable USB Debugging in your MIUI Device. The Qualcomm Drivers should now be installed, and your device will be detected as ' Qualcomm HS-USB QDLoader 9008 (COM3) ' under ' Ports (COM & LPT) ' in Device Manager. That's it now you have successfully downloaded and installed Qualcomm HS-USB QDLoader 9008 Driver on your Windows 10/7/8/8.1 computer. Need a Bluetooth Driver for your accessory? If you are having Bluetooth trouble, updates should be available through Microsoft's Windows Update service. If drivers were not downloaded automatically by Windows Update, use Device Manager to refresh the driver from Windows Update, or contact the device manufacturer.
Step 0 – Extract the Qualcomm QDLoader .zip file using either Winzip or Winrar.
Step 1 – Install either ADB USB Drivers or Mi PC Suite only if you have not done it yet, otherwise you don’t have to. This is necessary to make sure your computer can recognize and communicate with your phone properly.
Step 2 – Extract Minimal Fastboot .zip file and go to the folder of where the extracted files are located (via Windows Explorer).
Step 3 – Enable Developer Options on your phone. Just go toSettings >>About phones >> tap on the MIUI Version 7 times. You can skip this step if you have it enabled previously.
Qc Incorporated Port Devices Driver Download For Windows 10
Step 4 – Enable USB Debugging on your phone. Go to Settings >> Additional Settings >>Developer Options >> enable USB Debugging.
Step 5 – Now reboot your phone into Fastboot mode. In most cases, you can do it by pressing Volume Down (-) button and Power button simultaneously until Fastboot Bunny logo appeared.
Step 6 – Now connect your phone into your computer.
Step 7 – In Windows Explorer opening Minimal Fastboot Files folder, hold down / press the Shift button on your keyboard and right-click anywhere in the folder, and then choose “Open Command Window from Here” option.
Step 8 – Now type following command :
Your phone shall now reboot into EDL mode
Step 9 – Open up Device Manager from control panel and you will notice a new device is detected but its driver is not installed properly.
Usually it is displayed as “QHSUSB_BULK” under Other Devices.
Step 10 – Right-click on QHSUSB_BULK and choose “Update Driver Software“.
Step 11 – A dialog window shall appear. Choose “Browse my computer for driver software“.
Qc Incorporated Port Devices Driver Download For Windows
Step 12 – Now click on the Browse button and locate the extracted Qualcomm QDLoader drivers.
Step 13 – The installation process shall take place immediately and a system notification will appear. Just choose “Install this driver software anyway“.
Step 14 – Once done, you will see something like this.
Step 15 – Click the Close button and check back at Device Manager window. You will now see “Qualcomm HS-USB QDLoader 9008 (COM10)” under Ports (COM & LPT) section.
Done! Congratulation, you have now installed Qualcomm HS-USB QDLoader successfully on your computer.