The Sierra Wireless MC7304 PCI Express Mini Card is a compact, lightweight, wireless LTE- and UMTS-based modem. The MC7304 provides LTE, DC-HSPA+, HSDPA, HSUPA, WCDMA, GSM, GPRS, EDGE and GPS connectivity for networking and M2M applications over several radio frequency bands. The device also supports 2G/3G roaming. Available variants: 1102554. . Original: This is the original software/driver released with the computer. It is current and recommended for use. Updated: This software/driver is newer than the original version. It replaces the original software and is recommended for use. Archive: This software/driver has been replaced with an updated version. It is no longer current. This package installs the software (Wireless WAN driver). Sierra Wireless Driver and Firmware for the Sierra Wireless MC7355 and EM7355 multi carrier 4G/LTE modules. Supports AT&T, Verizon, and Sprint 3G and 4G/LTE network connectivity for Toughbook computers with Windows 7 and Windows 8/8.1 including Toughbook models (CF-19, CF-31, CF-53, CF-54, CF-C2, FZ-G1, FZ-M1). Drivers & Downloads Visit to the above 3. Windows Drivers & Downloads; 6. Windows Server™ 2003 R2. Information on Windows Server™ 2003 R2. ServerView for TX150 S2/TX150 S4/TX200 S2/RX100 S2/RX100 S3/RX200 S2/RX300 S2/RX600 S2/BX620 S2 Note. Update information for PRIMERGY FT-model.
Note: before proceeding with steps below, set adapter bindings by following instructions here
Launch DC-Unlocker client
Detect device by selecting SierraWireless/NETGEAR from manufacturers drop down menu list, leave Select model as auto detect (recommended) then click magnifying glass button
Wait till program detects device
Open Server tab, enter your username and password that you received after credits purchase. Click 'Check login'. (you can buy credits here www.dc-unlocker.com/buy).
If DC-Unlocker/Vygis/Rocker/Infinity dongle is connected, only click ' Check login '
Note: if you can't login or get error connecting to server after connecting Sierra Wireless AC754s to PC, check these settings here
Open Unlocking tab, click “Unlock” button
Wait for device to be unlocked
Sierra Wireless Card
After you see that modem was successfully unlocked, restart it by disconnecting and connecting back. Now you can use it with any SIM card.
Sierra Wireless Driver
Sierra Wireless Network Adapter Driver
NOTE: After resetting device to factory defaults, it might get relocked! In this case use same account to repeat unlock, this will cost 0 credits.