Sigma Micro USB Devices Driver Download For Windows 10

  1. Sigma Micro Usb Devices Driver Download For Windows 10 64-bit
  2. Sigma Micro Usb Devices Driver Download For Windows 10 Windows 7
  3. Sigma Micro Usb Devices Driver Download For Windows 10 Xp

I have a micro SD HC card reader that converts to USB that came with a Canakit for a raspberry Pi. For about 6 months the card reader worked no issues at all with my windows 10 computer. However recently the card reader is not being recognized by the windows 10 PC. Download for free Realtek Intel microphone Driver for Windows 10 (x64). Like what has been discussed before, SanDisk SSD driver for Windows 10 can be installed by the Chipset driver, and SanDisk USB drive driver comes into being from USB controller driver. So in terms of downloading SanDisk driver for Windows 10 on your own, you need either to the official site of your chipset or from the USB device.

Measurement Collection Specialists
Connect Any Gage into Any Software

Product Downloads

MicroRidge Product Updates Program
The MicroRidge Product Updates Program(Updates Program) provides access to the Setup Programs, Firmware Updates, User's Guides, Video Training, etc. for thecurrent MicroRidge product lines. MicroRidge recommends that you use this Updates Program for the current MicroRidge products rather than the links below. Click this link to access the Updates Program.

Wireless Downloads
The downloads for MobileCollect and GageWay Wireless are available on theWireless Downloads page.

User's Guides & Software
Listed below are the current User's Guides and software for the MicroRidge product line. User's Guides for our products may be useful for obtaining additional technical information about our products to assist you in your purchase decision.

GageWay Interfaces


Product
User's
Guide
Update
Detail
Setup
Program

Utility
Software

Firmware
Update
GageWay SMUser's GuideNo Updates
Available
--ComTestSerial--
GageWay KWUser's Guide--------
GageWay Pro2, Pro4 & Pro8User's Guide--1.1.0.34
11-16-20
--Version 1.28
2-1-21
GageWay SM USB Driver
Refer to USB Driver
----------

Software Keyboard Wedges


Product
User's
Guide
Update
Detail
Application
Software

Utility
Software

Firmware
Update
WedgeLink Ver 3
Lite/Standard
See WedgeLink Software page--See WedgeLink Software page----

Hardware Keyboard Wedges


Product
User's
Guide
Update
Detail
Application
Software

Utility
Software

Firmware
Update
WedgeLink SP for RS-232 DevicesUser's Guide--------
WedgeLink AT for RS-232 DevicesUser's Guide--1.1.0.20
2
-1-21
--Ver 1.36
2-1-21

Discontinued GageWay Interfaces


Product
User's
Guide
Update
Detail
Application
Software
Utility
Software
Firmware
Update
GageWay Series
(Discontinued February 13, 2017)
User's GuideReadMe
1-4-11
1.0.1.24
8-18-08
--Version 2.48
8-24-12
Mx4 & Mx8
(Discontinued February 13, 2017)
----Ver 1.1.0.11
6-19-13
--Ver 1.25
8-10-15

Discontinued Hardware Keyboard Wedges


Product
User's
Guide
Update
Detail
Application
Software

Utility
Software

Firmware
Update
WedgeLink HW for RS-232 Devices
(Discontinued October 5, 2015)
User's Guide--1.1.0.13
12-6-05
--Ver 2.14
8-7-13
WedgeLink SM for Mitutoyo Gages
(Discontinued October 5, 2015)
User's Guide--1.1.0.12
6-14-05
--Version 2.11
9-4-07

Discontinued ProCable


Product
User's
Guide
Update
Detail
Application
Software
Utility
Software
Firmware
Update
ProCableUser's GuideReadMe
9-2-08
Ver 1.1.0.3
9-2-08
--Ver 1.10
8-20-08

USB Driver
MicroRidge products that require a USB to Serial driver are all based on the USB to Serial IC manufactured by FTDI Chip (www.ftdichip.com). These products include:

  • GageWay SM with USB output

  • MobileCollect USB Base

  • Serial to USB interface cable

The latest USB driver for these devices can be downloaded below.

USB Driver

ProductUSB Driver
Version
USB Driver
Release Date
Virtual serial port USB Driver for Windows 7, Windows 8 and Windows 10. This driver is a WHQL (Windows Hardware Quality Labs) certified release.

This driver is only for use with products containing the USB to Serial IC manufactured by FTDI Chip.

Version 2.12.288-30-17

ComTestSerial
This free serial communications test program can be used with all MicroRidge products and any serial device. DownloadComTestSerialfree from our web.


Home MobileCollect Wireless GageWay Interfaces WedgeLink Keyboard Wedges
MobileCollect Store Mini Gage Cables Store Command Gage Cables Store RS-232 Gage Cables Store
GageWay Store Gage Cables Store WedgeLink Store USB & RS-232 Cables Store

Copyright ©2021 MicroRidge Systems, Inc.
All RightsReserved.

Revised February 8, 2020

To save your time, please contact us if you have any issues with this microscope. We have full experience. We are confident that we can provide you with a satisfactory solution. Our email address is [email protected].

Quick Access
Windows
Mac
Chrome OS
Linux
Android
Update driver in Windows
Windows

Since Jiusion microscopes use a standard webcam chipset, they will automatically install default webcam (UVC) drivers when plugged into a host device. They can be used with any webcam apps. User can select one or more to install.
Win10 built-in camera appxploviewAmcapCoolingtech
Easy to install××
User Friendly××
Snap button works××
Zoom button works×××
Measure function×××
SupportWin10 OnlyWin7/8/10Win7/8/10Win7/8/10

Windows 10 user please make sure the 'Camera' in privacy settings is on.
1) Win10 built-in camera app
If you are Win10 user, you can plug the microscope to the Win10 computer and open this app to use the microscope directly. You can click 'Windows' logo on the left and find the 'Camera' app. The downside is that you can't use the snap and zoom buttons in this app.
2) xploview
2.1 Download the xploview
xploview.exe(3.87MB) Windows XP, Vista, 7, 8, 10 32 or 64 bit
2.2 Install the xploview
Double click the “xploview” to start installation. Select your first language and click “Next”.
Click “Browse” if you want to install to other fodders. Click “Next”.
Click “Install”.
Wait for the installation to complete. Click 'Finish' to complete the installation.
2.3 Remove the microscpe lens cover and connect it to the computer
2.4 Open the xploview
Click ①'Settings'② 'Device' to select 'USB2.0 UVC PC Camera' on the dropdown. Click 'Apply'. Note the zoom button doesn’t work on this software.
3) Amcap
3.1 Download the Amcap
Amcap is a custom Windows (XP and above) software package designed specifically to work with the microscope.
Amcap.zip(3.38MB) Windows XP, Vista, 7, 8 32 or 64 bit
Amcap.exe(9.46MB) Windows 10 32 or 64 bit
Please tap this link to send an email to us if you can't download it [email protected]
Devices3.2 Extract the Amcap.zip
Step 1: Right Click the Amcap.zip and select 'Extract All'. Step 2: Click 'Browser' to select a location to save the Amcap and click 'Extract'. Step 3: Double click the extracted folder 'Amcap' to open it.
3.3 Install the Amcap
Double click the “setup.exe” to install the Amcap. Select ①Next - ②Next - ③Install - ④Yes - ⑤Finish - ⑥No, I will restart my computer later and Finish.
3.3 Remove the microscpe lens cover, plug the microscope and open the Amcap
Connect the microscope to the computer. Right click the Amcap and select 'Run as administrator' to open the Amcap software. Click 'Devices' to select the 'GL USB2.0 UVC Camera Device'.If you can't find the 'GL USB2.0 UVC Camera Device', please tapUpdate driver in Windowsto set up.
3.4 Setup the location to save pictures and videos
Pictures: Select “Capture” – Snapshot Location – Find or new a folder and click “Open”. You can double click the Snap button to take a picture.
Videos: Click “File” – “Set Capture File”. Find and select an avi format video file. Click “Open”.
4) CoolingTech
Coolingtech measurement software is compatible with Windows 7 8 10.
4.1 Download the CoolingTech
What we provided in this link is a installation-free green version. You can delete directly if you want to uninstall it. Click link as below to download the Coolingtech.zip.
Coolingtech.zip(2.55MB) Windows XP, Vista, 7, 8, 10 32 or 64 bit
4.2 Extract the Coolingtech.zip
Once the download is finished, right click the 'Coolingtech.zip' to select 'Extract All...' to extract files out.
4.3 Open the CoolingTech software
Please ritght click the CoolingTech.exe to select 'Run as administrator' to open the CoolingTech.exe. As it is a installation-free version, you can open the Coolingtech folder and run the “CoolingTech.exe” as admin to use the Coolingtech measurement software. Close other webcam software like camera app, xploview and Amcap if you can't see anything in this software. Please note the snap and zoom buttons don’t work in this software. If the software occur errors or want to get a diffence measurement software, please contact us via our customer service email [email protected].
Mac
Digital Viewer App is compatible with general purpose Mac microscope software from Plugable Technologies company. Install the app as below and open it. Plug the microscope to the Mac. Click “Settings” – “Device” to select “USB2.0 UVC PC Camera” on the dropdown to make the microscope work. MacOS10.14 and above users and need to allow the 'Digital Viewer' app to access camera in 'System Preferences' - 'Security & Privacy'. Note the zoom button doesn’t work on this software. Please tap this email to contact us if you can't use the microscope on Mac [email protected]
Digital_Viewer_3.3.30.pkg(8.66MB) macOS (10.13.4 and later) 64 bit
Digital_Viewer_3.1.06.dmg(2.67MB) Older macOS / OS X versions (10.5 and later) 32 bit
Remove the microscpe lens cover
Chrome OS
We don’t have drivers for Chrome OS as Jiusion microscopes can be used with the default Camera app that comes with Chrome. Go to Settings > Advanced Settings > Privacy > Content Settings > Camera, and change the device in the dropdown to “USB Microscope”. Access your camera and your magnified object should appear on the screen.
Remove the microscpe lens cover
Linux
Search for the application Cheese and click install. Once the installation is completed, open the application cheese. If the program displays your other camera, click on the word cheese in the top bar to access you preferences. In the webcam tab click on the dropdown menu and select USB Microscope.
Remove the microscpe lens cover
Android
Please note that Android support is on a case-by-case basis. Device manufacturers must have support for USB Video Class devices built in or this will not work.
Step 1: Install app
You can install the 3rd party camera app like “OTG View”, “inskam” “AN98” as below or install from Google Play. Note it may report unsafe as you didn't install from Google Play. You can choose to continue with the installation or install it from the Google Play. We recommend that Android 10 users install the AN98 app and Android 11 users install the inskam app.
Download the installation package directly:

OTG View.apk(17.52MB) Android 4.4 and above
inskam.apk(85.88MB) Android 4.4 and above
AN98.apk(14.01.MB) Android 4.0 and above
Download from Google Play:
OTG View, inskam, AN98
Step 2: Turn on the OTG function
Some phones may need to turn on the OTG manually by flicking downwards on the top side of the screen(Oneplus brand) or tapping Setting - Additional Settings – OTG(Oppo or Vivo brand). Please skip to step 3 if you can't find these options.
Step 3: Connect the microscope to the Android phone
Micro USB phone user please flip a piece on the USB plug from the microscope and plug the micro usb to the phone. Type C phone user please use the type c adapter to connect the microscope to the type c phone. Open the app (USB Camera/inskam/AN98) to use the microscope.
1)If the microscope LED doesn't light up, before contacting us, please check the led dial on the cable and make sure it is on. Please tap this email link [email protected] to send us email. It is micro usb or type c connection problem. We will exchange the adapter to you.
2)If the microscope LED lights up but no images on app, please install another 2 apps or tap this email Devices[email protected]utlook.com and email to us. It might be app version or microscope problem. We will send the app suitable for your phone. If it is a microscope problem, we will replace it for you free of charge.
Remove the microscpe lens cover
Update driver in Windows
Method 1: Uninstall the 'GL USB2.0 UVC Camera Device' driver in Control Panel
Open the 'Control Panel' - 'Uninstall a grogram' - 'GL USB2.0 UVC Camera Device'. Right click and select 'uninstall'. That’s all.
Step 1 You can find the Control panel by searching 'Control Panel' on Cortana. Or right click 'This PC

Sigma Micro Usb Devices Driver Download For Windows 10 64-bit

' and select 'Properties' - 'Control Panel Home'. Click 'Uninstall a program'.
Step 2 Select the “GL USB2.0 UVC Camera Device” and right click to select “Uninstall/Change

Sigma Micro Usb Devices Driver Download For Windows 10 Windows 7

Windows”. If it reports error, please follow the method 2.
Step 3 The microscope driver will switch to 'USB2.0 UVC PC Camera'. Open the Amcap or other microscope software to use the microscope.

Sigma Micro Usb Devices Driver Download For Windows 10 Xp

Method 2: Uninstall the 'GL USB2.0 UVC Camera Device' driver in Device Manager
Step 1 Open the Device Manager (search 'Device Manager' in Cortana or click 'Control Panel > System and Security > System). Click 'Imaging devices' and right-click the 'GL USB2.0 UVC Camera Device'. Select 'Uninstall device'.
Step 2 Select 'Delete the driver software for this device' and click 'Uninstall'.
Comments are closed.